Google News
logo
Mechanical Engineering : Engineering Thermodynamics - Quiz(MCQ)
A)
T
B)
√T
C)
1/T
D)
1/√T

Correct Answer :   T

A)
study of the conversion of chemical energy to other forms of energy
B)
study of the conversion of mechanical energy to other forms of energy
C)
study of the relationship between heat and other forms of energy
D)
study of the relationship between mechanical energy to other forms of energy

Correct Answer :   study of the relationship between heat and other forms of energy


Explanation : The branch of physical science is concerned with the relationship between heat, and other forms of energy like mechanical, electrical, chemical energy, etc.

A)
Chemical thermodynamics
B)
Classical thermodynamics
C)
Equilibrium thermodynamics
D)
All of the above

Correct Answer :   All of the above


Explanation : The branches of thermodynamics include :

1) Equilibrium thermodynamics
2) Classical thermodynamics
3) Chemical thermodynamics
4) Statistical mechanics or Statistical thermodynamics

A)
True
B)
False
C)
Can Not Say
D)
None of the above

Correct Answer :   True

A)
entropy
B)
enthalpy
C)
workdone
D)
None of the above

Correct Answer :   enthalpy

A)
Boyle's law
B)
Charles' law
C)
Gay-Lussac law
D)
All of the above

Correct Answer :   All of the above

A)
Correct
B)
Incorrect
C)
Can Not Say
D)
None of the above

Correct Answer :   Correct

A)
11/3
B)
11/7
C)
7/3
D)
8/3

Correct Answer :   7/3

A)
Boyle’s Law of thermodynamics
B)
Zeroth law of thermodynamics
C)
Faraday’s Law of thermodynamics
D)
Ideal Gas Law of thermodynamics

Correct Answer :   Ideal Gas Law of thermodynamics


Explanation : Thermodynamics is primarily based on a set of four rules that are universally applicable when applied to systems that fall within their respective limitations. They are as follows:

* Zeroth law of thermodynamics
* First law of thermodynamics
* Second law of thermodynamics
* Third law of thermodynamics

A)
1.333 N/m²
B)
13.33 N/m²
C)
133.3 N/m²
D)
1333 N/m²

Correct Answer :   133.3 N/m²

A)
normal
B)
standard
C)
Can Not Say
D)
None of the above

Correct Answer :   standard


Explanation : Standard temperature and pressure (STP) and Normal temperature and pressure (NTP) are two sets of reference conditions that are commonly used in science and engineering.

The main difference between STP and NTP is the temperature and pressure values that they represent.

STP is defined as a temperature of 0 degrees Celsius (273.15 K) and a pressure of 1 atmosphere (101.325 kPa or 760 mmHg).

STP is often used as a reference for measuring gas volumes and is commonly used in fields such as chemistry and physics.

NTP, on the other hand, is defined as a temperature of 20 degrees Celsius (293.15 K) and a pressure of 1 atmosphere (101.325 kPa or 760 mmHg). NTP is often used as a reference for measuring gas flow rates and is commonly used in fields such as engineering and environmental science.

It is important to note that STP and NTP are not interchangeable and their specific values should be used according to the context and application of the measurement being made.

12 .
The heat absorbed or rejected by the working substance is given by (where ds = Increase or decrease of entropy, T = Absolute temperature, and dQ = Heat absorbed or rejected)
A)
δQ = T.ds
B)
δQ = T/ds
C)
dQ = ds/T
D)
None of the above

Correct Answer :   δQ = T.ds

13 .
The value of cp/cv for air is
A)
1
B)
1.4
C)
1.8
D)
2.9

Correct Answer :   1.4

A)
Agree
B)
Disagree
C)
Can Not Say
D)
None of the above

Correct Answer :   Disagree

A)
heat and work crosses the boundary of the system, but the mass of the working substance does not crosses the boundary of the system
B)
mass of the working substance crosses the boundary of the system but the heat and work does not crosses the boundary of the system
C)
both the heat and work as well as mass of the working substance crosses the boundary of the system
D)
neither the heat and work nor the mass of the working substance crosses the boundary of the system

Correct Answer :   both the heat and work as well as mass of the working substance crosses the boundary of the system

A)
isentropically
B)
isothermally
C)
polytropically
D)
None of the above

Correct Answer :   isentropically

A)
increases the internal energy of the gas and increases the temperature of the gas
B)
does some external work during expansion
C)
Both (A) and (B)
D)
None of the above

Correct Answer :   increases the internal energy of the gas and increases the temperature of the gas

A)
Zeroth law of thermodynamics
B)
First law of thermodynamics
C)
Second law of thermodynamics
D)
Third law of thermodynamics

Correct Answer :   Second law of thermodynamics


Explanation : The concept of entropy as a physical attribute of a thermodynamic system is established by the second law of thermodynamics. Despite following the necessity of energy conservation as specified in the first law of thermodynamics, entropy predicts the direction of spontaneous processes and determines whether they are irreversible or impossible.

A)
Refrigerators
B)
Power plants
C)
Gas compressors
D)
All of the above

Correct Answer :   Power plants


Explanation : The second law of thermodynamics applies to all refrigerators, deep freezers, industrial refrigeration systems, all forms of air-conditioning systems, heat pumps, and so on. Thermodynamic cycles govern the operation of all forms of air and gas compressors, blowers, and fans. The study of the feasibility of employing various forms of renewable energy sources for household and commercial purposes is an important topic area of thermodynamics.

A)
Open system
B)
Closed system
C)
Thermally isolated system
D)
All of the above

Correct Answer :   All of the above


Explanation : The types of thermodynamic systems are :

i) Open system
ii) Closed system
iii) Thermally isolated system
iv) Mechanically isolated system
v) Isolated system

21 .
One reversible heat engine operates between 1600 K and Tâ‚‚ K and another reversible heat engine operates between Tâ‚‚ K and 400 K. If both the engines have the same heat input and output, then temperature Tâ‚‚ is equal to
A)
800K
B)
1000K
C)
1200K
D)
1400K

Correct Answer :   800K

A)
it is impossible to construct an engine working on a cyclic process, whose sole purpose is to convert heat energy into work
B)
it is possible to construct an engine working on a cyclic process, whose sole purpose is to convert heat energy into work
C)
it is impossible to construct a device which operates in a cyclic process and produces no effect other than the transfer of heat from a cold body to a hot body
D)
None of the above

Correct Answer :   it is impossible to construct an engine working on a cyclic process, whose sole purpose is to convert heat energy into work

A)
directly
B)
indirectly
C)
Can Not Say
D)
None of the above

Correct Answer :   directly

A)
Oxygen
B)
Methane
C)
Hydrogen
D)
Nitrogen

Correct Answer :   Hydrogen

A)
adiabatic process
B)
isothermal process
C)
polytropic process
D)
hyperbolic process

Correct Answer :   isothermal process

A)
the sum of partial pressure of the mixture of two gases is sum of the two
B)
the product of the gas constant and the molecular mass of an ideal gas is constant
C)
equal volumes of all gases, at the same temperature and pressure, contain equal number of molecules
D)
All of the above

Correct Answer :   equal volumes of all gases, at the same temperature and pressure, contain equal number of molecules

A)
Otto cycle is more efficient than Diesel cycle
B)
Dual cycle is more efficient than Otto and Diesel cycles
C)
Dual cycle is less efficient than Otto and Diesel cycles
D)
Diesel cycle is more efficient than Otto cycle

Correct Answer :   Diesel cycle is more efficient than Otto cycle

A)
Joule (J)
B)
Watt(W)
C)
Joule metre (Jm)
D)
Joule/metre (J/m)

Correct Answer :   Joule (J)

A)
p/T = constant, if v is kept constant
B)
v/T = constant, if p is kept constant
C)
p.v = constant, if T is kept constant
D)
T/p = constant, if v is kept constant

Correct Answer :   v/T = constant, if p is kept constant

A)
heat transfer is constant
B)
work transfer is constant
C)
mass flow at inlet and outlet is same
D)
All of the above

Correct Answer :   All of the above

A)
Correct
B)
Incorrect
C)
Can Not Say
D)
None of the above

Correct Answer :   Correct

A)
True
B)
False
C)
Can Not Say
D)
None of the above

Correct Answer :   True

A)
carbonisation
B)
full distillation
C)
cracking
D)
fractional distillation

Correct Answer :   cracking

34 .
If in the equation pvn = C, the value of n = 1, then the process is called isothermal process.
A)
True
B)
False
C)
Can Not Say
D)
None of the above

Correct Answer :   True

A)
Constant pvn process
B)
Constant volume process
C)
Constant pressure process
D)
All of the above

Correct Answer :   All of the above

A)
extensive
B)
intensive
C)
Can Not Say
D)
None of the above

Correct Answer :   intensive

A)
12
B)
14
C)
16
D)
32

Correct Answer :   32

A)
Carnot cycle
B)
Joule cycle
C)
Stirling cycle
D)
Ericsson cycle

Correct Answer :   Carnot cycle

39 .
A path 1-2-3 is given. A system absorbs 100 kJ as heat and does 60 kJ of work while along the path 1-4-3, it does 20 kJ of work. The heat absorbed during the cycle 1-4-3 is
Thermodynamics
A)
-40 kJ
B)
+60 kJ
C)
-80 kJ
D)
-140 kJ

Correct Answer :   +60 kJ

A)
isothermal
B)
polytropic
C)
isentropic
D)
None of the above

Correct Answer :   isentropic

A)
coke
B)
bituminous coal
C)
wood charcoal
D)
briquetted coal

Correct Answer :   wood charcoal

A)
specific heat at constant volume
B)
kilo-Joule
C)
specific heat at constant pressure
D)
None of the above

Correct Answer :   kilo-Joule

A)
doing some external work
B)
increasing the internal energy of gas
C)
increasing the internal energy of gas and also for doing some external work
D)
None of the above

Correct Answer :   increasing the internal energy of gas and also for doing some external work

A)
two isothermal and two isentropic processes
B)
two constant volume and two isentropic processes
C)
two constant pressure and two isentropic processes
D)
one constant volume, one constant pressure and two isentropic processes

Correct Answer :   two isothermal and two isentropic processes

A)
its temperature will increase
B)
its pressure will increase
C)
neither temperature nor pressure will increase
D)
both temperature and pressure will increase

Correct Answer :   both temperature and pressure will increase

A)
1
B)
1.4
C)
1.67
D)
1.92

Correct Answer :   1.67

A)
Agree
B)
Disagree
C)
Can Not Say
D)
None of the above

Correct Answer :   Agree

A)
Agree
B)
Disagree
C)
Can Not Say
D)
None of the above

Correct Answer :   Disagree

49 .
The general law of expansion or compression is pvn = C, The process is said to be hyperbolic, if n is equal to
A)
B)
1
C)
γ
D)

Correct Answer :   1

A)
Isochoric process
B)
Isenthalpic process
C)
Isenthalpic process
D)
Steady-state process

Correct Answer :   Steady-state process


Explanation : The following are some of the most commonly studied thermodynamic processes :

i) Heat does not lose or acquire energy in an adiabatic process.
ii) At a constant enthalpy, the isenthalpic process occurs.
iii) The isobaric process happens when the pressure remains constant.
iv) The isochoric process (also known as isometric/isovolumetric) happens at a constant volume.
v) At a constant temperature, an isothermal process occurs.
vi) Internal energy does not change in a steady-state operation.
vii) Isentropic process: adiabatic reversible process with constant entropy.

A)
First law of thermodynamics
B)
Second law of thermodynamics
C)
Third law of thermodynamics
D)
Fourth law of thermodynamics

Correct Answer :   Third law of thermodynamics


Explanation : The first law of thermodynamics connects a system’s many kinds of kinetic and potential energy to the work it can do and the heat it can transfer. This law, which also includes an extra state variable, enthalpy, is occasionally used to define internal energy.

A)
reversible cycles
B)
irreversible cycles
C)
quasi-static cycles
D)
semi-reversible cycles

Correct Answer :   reversible cycles

A)
zero
B)
1
C)
1/5
D)
4/5

Correct Answer :   zero

A)
Charles' law
B)
Boyle's law
C)
Gay-Lussac law
D)
Avogadro's law

Correct Answer :   Boyle's law

A)
reversible cycle
B)
irreversible cycle
C)
thermodynamic cycle
D)
None of the above

Correct Answer :   thermodynamic cycle

A)
Agree
B)
Disagree
C)
Can Not Say
D)
None of the above

Correct Answer :   Agree

57 .
One m³ of methane (CHâ‚„) requires 2m³ of oxygen and produces 1m³ of carbon dioxide and 2m³ of water or steam.
A)
Correct
B)
Incorrect
C)
Can Not Say
D)
None of the above

Correct Answer :   Correct

A)
1.013 bar
B)
760 mm of Hg
C)
1013 x 10² N/m²
D)
All of the above

Correct Answer :   All of the above

59 .
One kg of ethylene (Câ‚‚Hâ‚„) requires 2 kg of oxygen and produces 22/7 kg of carbon dioxide and ___kg of water or steam.
A)
7/4
B)
9/7
C)
11/4
D)
11/7

Correct Answer :   9/7

A)
atom
B)
molecule
C)
element
D)
compound

Correct Answer :   molecule

A)
0K
B)
1K
C)
3K
D)
4K

Correct Answer :   0K


Explanation : The temperature of an object on a scale with 0 as absolute zero is known as absolute temperature, also known as thermodynamic temperature. Kelvin and Rankine are absolute temperature scales.

A)
Heat engines
B)
Gas compressors
C)
Gas turbine engines
D)
All of the above

Correct Answer :   All of the above


Explanation : Carnot’s theorem states that all heat engines between two heat reservoirs are less efficient than a Carnot heat engine operating between the same reservoirs.

A)
168kPa
B)
198kPa
C)
218kPa
D)
318kPa

Correct Answer :   198kPa


Explanation : Pw = Po + mg/A = 100000 + (100*9.8/0.01) = 198kPa.

A)
law of degradation of energy
B)
law of conservation of energy
C)
law of equipartition of energy
D)
None of the above

Correct Answer :   law of equipartition of energy

A)
is equal to
B)
is not equal to
C)
Can Not Say
D)
None of the above

Correct Answer :   is not equal to

A)
greater than Carnot cycle
B)
equal to Carnot cycle
C)
less than Carnot cycle
D)
All of the above

Correct Answer :   less than Carnot cycle

A)
peat
B)
brown coal
C)
coking bituminous coal
D)
non-coking bituminous coal

Correct Answer :   non-coking bituminous coal

A)
Boyle's law
B)
Charles' law
C)
Gay-Lussac law
D)
Avogadro's law

Correct Answer :   Boyle's law

A)
Isothermal expansion
B)
Isentropic expansion
C)
Isentropic compression
D)
Isothermal compression

Correct Answer :   Isothermal compression

A)
1
B)
0
C)
-1
D)
10

Correct Answer :   0

A)
Yes
B)
No
C)
Can Not Say
D)
None of the above

Correct Answer :   Yes

A)
It is used as the alternate standard of comparison of all heat engines.
B)
It provides concept of maximising work output between the two temperature limits.
C)
All the heat engines are based on Carnot cycle.
D)
All of the above

Correct Answer :   All the heat engines are based on Carnot cycle.

A)
adiabatic process
B)
polytropic process
C)
hyperbolic process
D)
isothermal process

Correct Answer :   hyperbolic process

A)
two constant volume and two isothermal
B)
two constant volume and two isentropic
C)
two constant pressure and two isentropic
D)
one constant pressure, one constant volume and two isentropic

Correct Answer :   one constant pressure, one constant volume and two isentropic

A)
It is possible to transfer heat from a body at a lower temperature to a body at a higher temperature.
B)
It is impossible to transfer heat from a body at a lower temperature to a body at a higher temperature, without the aid of an external source.
C)
It is possible to transfer heat from a body at a lower temperature to a body at a higher temperature by using refrigeration cycle.
D)
None of the above

Correct Answer :   It is impossible to transfer heat from a body at a lower temperature to a body at a higher temperature, without the aid of an external source.

76 .
If in the equation pvn = C, the value of n = ∝ , then the process is called
A)
constant volume process
B)
adiabatic process
C)
isothermal process
D)
constant pressure process

Correct Answer :   constant volume process

A)
air
B)
steam
C)
ordinary gas
D)
perfect gas

Correct Answer :   perfect gas

A)
Isobaric process
B)
Isochoric process
C)
Hyperbolic process
D)
All of the above

Correct Answer :   All of the above

A)
monoatomic
B)
diatomic
C)
triatomic
D)
polyatomic

Correct Answer :   monoatomic

A)
1 g
B)
10 g
C)
100 g
D)
1000 g

Correct Answer :   1000 g

A)
thermodynamic law
B)
thermodynamic system
C)
thermodynamic cycle
D)
thermodynamic process

Correct Answer :   thermodynamic system

A)
petrol
B)
kerosene
C)
fuel oil
D)
lubricating oil

Correct Answer :   lubricating oil

A)
adiabatic process
B)
hyperbolic process
C)
isothermal process
D)
polytropic process

Correct Answer :   adiabatic process

A)
atomic mass of the gas and the gas constant
B)
molecular mass of the gas and the specific heat at constant volume
C)
molecular mass of the gas and the gas constant
D)
molecular mass of the gas and the specific heat at constant pressure

Correct Answer :   molecular mass of the gas and the gas constant

A)
enthalpy
B)
entropy
C)
internal energy
D)
external energy

Correct Answer :   entropy

A)
possible
B)
impossible
C)
Can Not Say
D)
None of the above

Correct Answer :   impossible

A)
Boyle's law
B)
Gay-Lussac law
C)
Avogadro's law
D)
Charles' law

Correct Answer :   Charles' law

A)
Bell-Coleman cycle
B)
Carnot cycle
C)
Rankine cycle
D)
Stirling cycle

Correct Answer :   Bell-Coleman cycle

A)
Zeroth law of thermodynamics
B)
First law of thermodynamics
C)
Second law of thermodynamics
D)
Kinetic theory of gases

Correct Answer :   First law of thermodynamics

A)
Density
B)
Volume
C)
Pressure
D)
Temperature

Correct Answer :   Volume

A)
1 N-m/s
B)
100 N-m
C)
1000 N-m/s
D)
1 x 10⁶ N-m/s

Correct Answer :   1000 N-m/s

A)
entropy
B)
heat
C)
work
D)
internal energy

Correct Answer :   entropy

A)
remains constant
B)
increases
C)
decreases
D)
None of the above

Correct Answer :   increases

A)
two constant volume and two isentropic processes
B)
two constant pressure and two isothermal processes
C)
two constant volume and two isothermal processes
D)
one constant volume, one constant pressure and two isentropic processes

Correct Answer :   two constant volume and two isothermal processes

A)
300° to 500°C
B)
500° to 700°C
C)
700° to 900°C
D)
900° to 1100°C

Correct Answer :   900° to 1100°C

A)
total energy of a system remains constant
B)
total internal energy of a system during a process remains constant
C)
workdone by a system is equal to the heat transferred by the system
D)
internal energy, enthalpy and entropy during a process remains constant

Correct Answer :   total energy of a system remains constant

A)
equal to
B)
directly proportional to
C)
inversely proportional to
D)
None of the above

Correct Answer :   directly proportional to

A)
1.817
B)
4.187
C)
2512
D)
None of the above

Correct Answer :   4.187

A)
4/7
B)
9/7
C)
11/4
D)
All of the above

Correct Answer :   4/7

A)
237°F
B)
-237°F
C)
273°C
D)
-273°C

Correct Answer :   -273°C

A)
True
B)
False
C)
Can Not Say
D)
None of the above

Correct Answer :   True

A)
swept volume to total volume
B)
total volume to swept volume
C)
total volume to clearance volume
D)
swept volume to clearance volume

Correct Answer :   total volume to clearance volume

A)
2
B)
4
C)
8
D)
16

Correct Answer :   2

A)
less than
B)
equal to
C)
greater than
D)
None of the above

Correct Answer :   equal to

A)
greater than
B)
less than
C)
equal to
D)
None of the above

Correct Answer :   less than

A)
a condenser is used
B)
direct combustion system is used
C)
the indirect heat exchanger and cooler is avoided
D)
All of the above

Correct Answer :   All of the above

A)
carbonisation of bituminous coal
B)
passing steam over incandescent coke
C)
passing air and a large amount of steam over waste coal at about 650°C
D)
partial combusion of coal, coke, anthracite coal or charcoal in a mixed air steam blast

Correct Answer :   passing air and a large amount of steam over waste coal at about 650°C

A)
wood
B)
coke
C)
anthracite coal
D)
pulverised coal

Correct Answer :   wood

A)
the working parts of the engine must be friction free
B)
all the processes, taking place in the cycle of operation, must be extremely slow
C)
the pressure and temperature of the working substance must not differ, appreciably, from those of the surroundings at any stage in the process
D)
All of the above

Correct Answer :   All of the above

A)
Mond gas
B)
Coal gas
C)
Producer gas
D)
Coke oven gas

Correct Answer :   Coal gas

A)
287 J/kgK
B)
28.7 J/kgK
C)
2.87 J/kgK
D)
0.287 J/kgK

Correct Answer :   287 J/kgK

A)
constant cut-off
B)
decrease in cut-off
C)
increase in cut-off
D)
None of the above

Correct Answer :   decrease in cut-off

113 .
The value of specific heat at constant pressure (cp) is __________ that of at constant volume (cv).
A)
less than
B)
equal to
C)
more than
D)
None of the above

Correct Answer :   more than

A)
atomisation
B)
carbonisation
C)
Can Not Say
D)
None of the above

Correct Answer :   carbonisation

115 .
Which of the following is correct?
A)
Absolute pressure = Gauge pressure + Atmospheric pressure
B)
Gauge pressure = Absolute pressure + Atmospheric pressure
C)
Atmospheric pressure = Absolute pressure + Gauge pressure
D)
Absolute pressure = Gauge pressure - Atmospheric pressure

Correct Answer :   Absolute pressure = Gauge pressure + Atmospheric pressure

116 .
The distillation carried out in such a way that the liquid with the lowest boiling point is first evaporated and recondensed, then the liquid with the next higher boiling point is then evaporated and recondensed, and so on until all the available liquid fuels are separately recovered in the sequence of their boiling points. Such a process is called
A)
cracking
B)
carbonisation
C)
full distillation
D)
fractional distillation

Correct Answer :   fractional distillation

117 .
The general gas equation is (where p = Pressure, v = Volume, m = mass, T = Absolute temperature, and R = Gas constant)
A)
pvm = C
B)
pv = mRT
C)
pv = RTm
D)
pv = (RT)m

Correct Answer :   pv = mRT

A)
3 kg of water
B)
7 kg of water
C)
8 kg of water
D)
9 kg of water

Correct Answer :   9 kg of water

A)
sum of two specific heats
B)
ratio of two specific heats
C)
difference of two specific heats
D)
product of two specific heats

Correct Answer :   difference of two specific heats

A)
pressure ratio
B)
minimum cycle temperature
C)
maximum cycle temperature
D)
All of the above

Correct Answer :   All of the above

A)
True
B)
False
C)
Can Not Say
D)
None of the above

Correct Answer :   True

122 .
The reading of the pressure gauge fitted on a vessel is 25 bar. The atmospheric pressure is 1.03 bar and the value of 'g' is 9.81 m/s². The absolute pressure in the vessel is
A)
34.81 bar
B)
26.03 bar
C)
25 bar
D)
23.97 bar

Correct Answer :   26.03 bar

A)
two constant volume and two isentropic processes
B)
two constant volume and two isothermal processes
C)
two constant pressure and two isentropic processes
D)
one constant pressure, one constant volume and two isentropic processes

Correct Answer :   two constant volume and two isentropic processes

A)
decrease in pressure
B)
increase in temperature
C)
increase in availability of energy
D)
degradation of energy

Correct Answer :   degradation of energy

125 .
In a free expansion process,
A)
dU = 0
B)
Q1 - 2 = 0
C)
W1 - 2 = 0
D)
All of the above

Correct Answer :   All of the above

A)
Solid
B)
Gas
C)
Liquid
D)
None of the above

Correct Answer :   Gas


Explanation : Smallest variation is observed among different gas thermometers.

A)
sum of the force and distance travelled parallel to the force
B)
sum of the force and distance travelled perpendicular to the force
C)
product of the force and distance travelled parallel to the force
D)
product of the force and distance travelled perpendicular to the force

Correct Answer :   product of the force and distance travelled parallel to the force


Explanation : The work is done by a force acting on a body moving in the force’s direction.

A)
BP/IP
B)
IP/BP
C)
(BP*IP)
D)
1/(BP*IP)

Correct Answer :   BP/IP


Explanation : Brake power is less than indicated power and mechanical efficiency is given by BP/IP.

A)
vertical motion
B)
horizontal motion
C)
rotational motion
D)
None of the above

Correct Answer :   rotational motion


Explanation : When a shaft is rotated by a motor, there is work transfer into the system.

130 .
A refrigerator with a 2 kW motor for powering the compressor gives 6000 kJ of cooling to the refrigerated space during 30 minutes of operation in a thermally insulated kitchen. Calculate the change in internal energy of the kitchen if the condenser coil behind the refrigerator rejects 8000 kJ of heat to the kitchen over the same time period.
A)
2400 kJ
B)
3600 kJ
C)
4800 kJ
D)
None of the above

Correct Answer :   3600 kJ


Explaination : QKitchen = 0 (Insulated!),
W(Electrical) = – P*∆τ = – 2 kW*30*60 sec = – 3600 kJ
(It is negative because work is done on to the system)
Change in internal energy of the kitchen (∆UKitchen) = QKitchen – WElectrical
= 0 – (–3600) = 3600 kJ.

A)
3/7
B)
7/3
C)
3/11
D)
11/3

Correct Answer :   11/3

132 .
The heat supplied to the gaS at constant volume is (where m = Mass of gas, cv = Specific heat at constant volume, cp = Specific heat at constant pressure, T2 - T1 = Rise in temperature, and R = Gas constant)
A)
mR(T2 - T1)
B)
mcv(T2 - T1)
C)
mcp(T2 - T1)
D)
mcp(T2 + T1)

Correct Answer :   mcv(T2 - T1)

A)
Agree
B)
Disagree
C)
Can Not Say
D)
None of the above

Correct Answer :   Agree

134 .
The expansion ratio (r) is the ratio of (where v₁ = Volume at the beginning of expansion, and v₂ = Volume at the end of expansion)
A)
v₁/v₂
B)
v₂/v₁
C)
v₁+v₂/v₁
D)
v₁+v₂/v₂

Correct Answer :   vâ‚‚/v₁

A)
Agree
B)
Disagree
C)
Can Not Say
D)
None of the above

Correct Answer :   Agree

A)
increases power output
B)
do not damage turbine blades
C)
reduces exhaust temperature
D)
improves thermal efficiency

Correct Answer :   reduces exhaust temperature

A)
Dual cycle, Otto cycle, Diesel cycle
B)
Dual cycle, Diesel cycle, Otto cycle
C)
Otto cycle, Diesel cycle, Dual cycle
D)
Diesel cycle, Otto cycle, Dual cycle

Correct Answer :   Dual cycle, Diesel cycle, Otto cycle

A)
Agree
B)
Disagree
C)
Can Not Say
D)
None of the above

Correct Answer :   Agree

139 .
Which of the following statement is correct?
A)
The increase in entropy is obtained from a given quantity of heat at a low temperature.
B)
The entropy represents the maximum amount of work obtainable per degree drop in temperature.
C)
The change in entropy may be regarded as a measure of the rate of the availability or unavailability of heat for transformation into work.
D)
All of the above

Correct Answer :   All of the above

A)
first kind
B)
second kind
C)
Can Not Say
D)
None of the above

Correct Answer :   second kind

A)
Joule's law
B)
Boyle's law
C)
Gay-Lussac law
D)
Charles' law

Correct Answer :   Charles' law

A)
low
B)
high
C)
Both (A) and (B)
D)
None of the above

Correct Answer :   low

A)
1 x 10² N/m²
B)
1 x 10³ N/m²
C)
1 x 10⁴ N/m²
D)
1 x 10⁵ N/m²

Correct Answer :   1 x 10⁵ N/m²

A)
Agree
B)
Disagree
C)
Can Not Say
D)
None of the above

Correct Answer :   Disagree

A)
adiabatic process
B)
isothermal process
C)
throttling process
D)
free expansion process

Correct Answer :   throttling process

A)
less than
B)
equal to
C)
more than
D)
None of the above

Correct Answer :   less than

147 .
The kinetic energy per kg molecule of any gas at absolute temperature T is equal to (where Ru = Universal gas constant)
A)
Ru x T
B)
2 Ru x T
C)
3 Ru x T
D)
1.5 Ru x T

Correct Answer :   1.5 Ru x T

A)
Mass
B)
Energy
C)
Temperature
D)
Volume

Correct Answer :   Temperature

A)
one
B)
two
C)
three
D)
four

Correct Answer :   three

A)
Boyle
B)
Joule
C)
Charles
D)
None of the above

Correct Answer :   Joule

A)
unrestricted expansion
B)
mechanical and fluid friction
C)
heat transfer with a finite temperature difference
D)
All of the above

Correct Answer :   All of the above

A)
two constant volume
B)
two isentropic
C)
two constant pressure
D)
one constant pressure, one constant volume

Correct Answer :   two constant volume

A)
volume
B)
pressure
C)
temperature
D)
All of the above

Correct Answer :   All of the above

A)
pressure ratio
B)
volume compression ratio
C)
temperature limits
D)
cut-off ratio and compression ratio

Correct Answer :   temperature limits

A)
work ratio
B)
thermal efficiency
C)
avoids pollution
D)
None of the above

Correct Answer :   thermal efficiency

A)
Peat
B)
Anthracite coal
C)
Lignite
D)
Bituminous coal

Correct Answer :   Anthracite coal

A)
equal to
B)
less than
C)
greater than
D)
None of the above

Correct Answer :   equal to

158 .
If the value of n = 0 in the equation pvn = C, then the process is called
A)
adiabatic process
B)
isothermal process
C)
constant volume process
D)
constant pressure process

Correct Answer :   constant pressure process

A)
cut-off is zero
B)
cut-off is increased
C)
cut-off is decreased
D)
cut-off is constant

Correct Answer :   cut-off is zero

A)
decreases
B)
remains constant
C)
increases
D)
None of the above

Correct Answer :   increases

161 .
The ratio of specific heat at constant pressure (cp) and specific heat at constant volume (cv) is
A)
equal to one
B)
less than one
C)
greater than one
D)
None of the above

Correct Answer :   greater than one

A)
32
B)
16
C)
14
D)
12

Correct Answer :   16

A)
adiabatic processes
B)
non-flow processes
C)
flow processes
D)
None of the above

Correct Answer :   flow processes

A)
3 to 6
B)
5 to 8
C)
15 to 20
D)
20 to 30

Correct Answer :   5 to 8

A)
zero
B)
minimum
C)
maximum
D)
positive

Correct Answer :   zero

A)
one-half
B)
one-third
C)
two-third
D)
three-fourth

Correct Answer :   two-third

A)
Carbon
B)
Oxygen
C)
Sulphur
D)
Nitrogen

Correct Answer :   Carbon

A)
Joule
B)
Clausis
C)
Kelvin
D)
Gay-Lussac

Correct Answer :   Clausis

A)
irreversible process
B)
reversible or irreversible process
C)
reversible process
D)
None of the above

Correct Answer :   reversible process

A)
temperature of the gas
B)
volume occupied by the gas
C)
pressure exerted by the gas
D)
All of the above

Correct Answer :   All of the above

171 .
Which of the following is the correct statement?
A)
For a given compression ratio, Diesel cycle is more efficient than Otto cycle.
B)
For a given compression ratio, Otto cycle is more efficient than Diesel cycle.
C)
The efficiency of Otto or Diessel cycle has nothing to do with compressioin ratio.
D)
For a given compression ratio, both Otto and Diesel cycles have the same efficiency.

Correct Answer :   For a given compression ratio, Otto cycle is more efficient than Diesel cycle.

A)
coke
B)
wood charcoal
C)
bituminous coke
D)
pulverised coal

Correct Answer :   pulverised coal

A)
Gay-Lussac law
B)
Boyle's law
C)
Charles' law
D)
Avogadro's law

Correct Answer :   Gay-Lussac law

A)
absolute temperature
B)
absolute zero temperature
C)
absolute scale of temperature
D)
None of the above

Correct Answer :   absolute zero temperature

175 .
At 15°C, a steel pot with a 5 mm thick bottom is filled with liquid water (conductivity 50 W/m K). The pot has a 10 cm radius and is now placed on a stove with a heat transmission of 250 W. Calculate the temperature on the bottom of the outer pot assuming the inner surface is 15°C.
A)
15.8°C
B)
16.8°C
C)
18.8°C
D)
19.8°C

Correct Answer :   15.8°C


Explaination : Steady conduction, Q = k A ∆T/∆x ⇒ âˆ†Τ = Q ∆x / kΑ
∆T = 250 × 0.005/(50 × π/4 × 0.22) = 0.796
T = 15 + 0.796 = 15.8°C.

A)
positive, positive
B)
negative, negative
C)
positive, negative
D)
negative, positive

Correct Answer :   positive, negative


Explanation : The direction of heat transfer is taken from the high-temperature system to the low-temperature system.

A)
7/3 kg of carbon monoxide gas
B)
8/3 kg of carbon monoxide gas
C)
11/3 kg of carbon dioxide gas
D)
11/7 kg of carbon dioxide gas

Correct Answer :   11/7 kg of carbon dioxide gas

A)
constant pressure
B)
constant volume
C)
constant temperature
D)
None of the above

Correct Answer :   constant pressure

A)
224 litres
B)
22.4 litres
C)
2.24 litres
D)
0.224 litres

Correct Answer :   22.4 litres

A)
at sea level
B)
at the centre of the earth
C)
at the temperature of - 273 K
D)
when molecular momentum of the system becomes zero

Correct Answer :   when molecular momentum of the system becomes zero

A)
macroscopic kinetic energy
B)
microscopic kinetic energy
C)
macroscopic potential energy
D)
microscopic potential energy

Correct Answer :   macroscopic potential energy


Explanation : The above formula gives the macroscopic potential energy of the fluid element by virtue of its position.

A)
water
B)
steam
C)
ideal gas
D)
all gases

Correct Answer :   ideal gas


Explanation : The enthalpy of an ideal gas depends only on the temperature because the internal energy of an ideal gas depends only on the temperature.

A)
open system
B)
closed system
C)
isolated system
D)
None of the above

Correct Answer :   open system


Explanation : Basic definition of an open system.

184 .
The general gas energy equation is (where Q1 - 2 = Heat supplied, dU = Change in internal energy, and W1 - 2 = Work done in heat units)
A)
Q1 - 2 = dU + W1 - 2
B)
Q1 - 2 = dU - W1 - 2
C)
Q1 - 2= dU/W1 - 2
D)
Q1 - 2 = dU x W1 - 2

Correct Answer :   Q1 - 2 = dU + W1 - 2

A)
3 to 6
B)
5 to 8
C)
15 to 20
D)
20 to 30

Correct Answer :   15 to 20

A)
there is no change in enthalpy
B)
there is no change in temperature
C)
there is no change in internal energy
D)
All of the above

Correct Answer :   All of the above

187 .
A mixture of gas expands from 0.03 m³ to 0.06 m³ at a constant pressure of 1 MPa and absorbs 84 kJ of heat during the process. The change in internal energy of the mixture is
A)
30 kJ
B)
54 kJ
C)
84 kJ
D)
114 kJ

Correct Answer :   54 kJ

A)
sum
B)
difference
C)
ratio
D)
product

Correct Answer :   difference

A)
reversible
B)
irreversible
C)
Can Not Say
D)
None of the above

Correct Answer :   irreversible

A)
heat rejection is lower
B)
maximum temperature is higher
C)
combustion is at constant volume
D)
expansion and compression are isentropic

Correct Answer :   heat rejection is lower

191 .
Which of the following is the correct statement?
A)
All the reversible engines have the same efficiency.
B)
Irreversible engines have maximum efficiency.
C)
All the reversible and irreversible engines have the same efficiency.
D)
All engines are designed as reversible in order to obtain maximum efficiency.

Correct Answer :   Irreversible engines have maximum efficiency.

A)
possible
B)
impossible
C)
Can Not Say
D)
None of the above

Correct Answer :   impossible

A)
heat energy
B)
lower calorific value
C)
calorific value
D)
higher calorific value

Correct Answer :   calorific value

A)
heat and work
B)
temperature and volume
C)
pressure and temperature
D)
All of the above

Correct Answer :   pressure and temperature

A)
petrol engine
B)
diesel engine
C)
irreversible engine
D)
reversible engine

Correct Answer :   reversible engine

A)
lower
B)
higher
C)
same
D)
None of the above

Correct Answer :   higher

A)
greater than
B)
equal to
C)
less than
D)
None of the above

Correct Answer :   greater than

A)
kJ
B)
kJ/kg
C)
kJ/m²
D)
kJ/m³

Correct Answer :   kJ/m³

A)
mass balance
B)
energy balance
C)
mass balance and energy balance
D)
None of the above

Correct Answer :   mass balance and energy balance

A)
orifice
B)
porous plug
C)
partially opened valve
D)
All of the above

Correct Answer :   All of the above

A)
rate of energy inflow + rate of energy outflow
B)
rate of energy inflow – rate of energy outflow
C)
rate of energy inflow * rate of energy outflow
D)
rate of energy inflow / rate of energy outflow

Correct Answer :   rate of energy inflow – rate of energy outflow


Explanation : The rate of accumulation of energy within the control volume is equal to the net energy flow across the control surface.

203 .
A cylinder/piston contains 1kg methane gas at 100 kPa, 20°C. The gas is compressed reversibly to a pressure of 800 kPa. What is the work required if the process is isothermal?
A)
-116.0 kJ
B)
-216.0 kJ
C)
-316.0 kJ
D)
-416.0 kJ

Correct Answer :   -316.0 kJ


Explaination : Process: T = constant. For ideal gas then u2 = u1 1W2 = 1Q2 and ∫ dQ/T = 1Q2/T
1W2 = 1Q2 = mT(s2 – s1) = -mRT ln(P2/P1)
= -0.51835× 293.2 ln(800/100) = -316.0 kJ.

A)
dQ=0
B)
the process is adiabatic
C)
the process is quasi-static
D)
All of the above

Correct Answer :   All of the above


Explanation : Applying the first law to the control volume and dW=0, dm=0 and KE and PE of the fluid are assumed to be small.

A)
positive
B)
negative
C)
Both (A) and (B)
D)
None of the above

Correct Answer :   positive

206 .
The general law for the expansion or compression of gases, is
A)
pv = C
B)
pv = m R T
C)
pvn = C
D)
pvγ = C

Correct Answer :   pvn = C

A)
kinetic energy
B)
external energy
C)
internal energy
D)
molecular energy

Correct Answer :   internal energy

A)
increases the internal energy of the gas
B)
increases the temperature of the gas
C)
does some external work during expansion
D)
Both (B) and (C)

Correct Answer :   Both (B) and (C)

A)
Boyle's law
B)
Joule's law
C)
Charle's law
D)
Gay-Lussac law

Correct Answer :   Joule's law

210 .
A piston/cylinder contains carbon dioxide at 300 kPa, 100°C with a volume of 0.2 m^3. Weights are added at such a rate that the gas compresses according to the relation PV^1.2 = constant to a final temperature of 200°C. Find the work done during the process.
A)
60.4 kJ
B)
-50.4 kJ
C)
80.4 kJ
D)
-80.4 kJ

Correct Answer :   -80.4 kJ


Explaination : For the Polytropic process PVn = constant
1W2 = ∫PdV = (P2V2 – P1V1)/(1 – n )
Assuming ideal gas, PV = mRT
But mR = P1V1/T1 = 300 × 0.2/373.15 = 0.1608 kJ/K
1W2 = 0.1608(473.15 – 373.15)/(1 – 1.2) = -80.4 kJ.

A)
stores work as KE or PE
B)
all processes within an MER are quasi-static
C)
it is a large body enclosed by an adiabatic impermeable wall
D)
All of the above

Correct Answer :   All of the above

A)
it is impossible to construct a device that can transfer heat from a cooler body to a hotter body without any effect
B)
it is possible to construct a device that can transfer heat from a cooler body to a hotter body without any effect
C)
it is impossible to construct a device that can transfer heat from a hotter body to a cooler body without any effect
D)
None of the above

Correct Answer :   it is impossible to construct a device that can transfer heat from a cooler body to a hotter body without any effect

A)
not connected to each other
B)
violation of one doesn’t violate the other
C)
virtually two parallel statements of the second law
D)
None of the above

Correct Answer :   virtually two parallel statements of the second law

A)
1 N-m
B)
1 kN-m
C)
10 N-m/s
D)
10 kN-m/s

Correct Answer :   1 N-m

A)
adiabatic process
B)
polytropic process
C)
isothermal process
D)
hyperbolic process

Correct Answer :   polytropic process

A)
Otto cycle
B)
Joule's cycle
C)
Carnot cycle
D)
Stirling cycle

Correct Answer :   Joule's cycle

A)
air
B)
steam
C)
vapour
D)
perfect gas

Correct Answer :   perfect gas

A)
less than Diesel cycle
B)
greater than Diesel cycle
C)
greater than Diesel cycle and less than Otto cycle
D)
less than Diesel cycle and greater than Otto cycle

Correct Answer :   greater than Diesel cycle and less than Otto cycle

A)
when coal is first dried and then crushed to a fine powder by pulverising machine
B)
by heating wood with a limited supply of air to a temperature not less than 280°C
C)
from the finely ground coal by moulding under pressure with or without a binding material
D)
when coal is strongly heated continuously for 42 to 48 hours in the absence of air in a closed vessel

Correct Answer :   when coal is strongly heated continuously for 42 to 48 hours in the absence of air in a closed vessel

A)
loss of heat
B)
gain of heat
C)
no loss of heat
D)
no gain of heat

Correct Answer :   loss of heat

A)
no heat enters or leaves the gas
B)
the temperature of the gas changes
C)
the change in internal energy is equal to the mechanical workdone
D)
All of the above

Correct Answer :   All of the above

A)
Kerosene
B)
Gasoline
C)
Fuel oil
D)
None of the above

Correct Answer :   Gasoline

A)
Otto cycle
B)
Carnot cycle
C)
Diesel cycle
D)
Stirling cycle

Correct Answer :   Diesel cycle

A)
low
B)
very low
C)
high
D)
very high

Correct Answer :   very low

A)
kilo Joule
B)
specific heat at constant pressure
C)
specific heat at constant volume
D)
None of the above

Correct Answer :   specific heat at constant volume

A)
inelasticity
B)
friction, viscosity
C)
electrical resistance, magnetic hysteresis
D)
All of the above

Correct Answer :   All of the above


Explanation : These effects are known as dissipative effects.

A)
low, high, receives
B)
low, high, gives
C)
high, low, gives
D)
high, low, receives

Correct Answer :   low, high, receives


Explanation : In a reversed heat engine, the magnitude of energy transfers remains the same and only directions change.

A)
triple point of water
B)
absolute zero
C)
boiling point of water
D)
None of the above

Correct Answer :   absolute zero


Explanation : The smallest possible value of Q which is the amount of heat supply is zero and the corresponding temperature is zero.

229 .
Which of the following is known as the inequality of Clausius?
A)
cyclic integral of dW/T<=0
B)
cyclic integral of dQ/T>=0
C)
cyclic integral of dQ/T<=0
D)
cyclic integral of dW/T>=0

Correct Answer :   cyclic integral of dQ/T<=0

A)
path function, extensive property
B)
point function, extensive property
C)
path function, intensive property
D)
point function, intensive property

Correct Answer :   point function, extensive property

A)
for reversible adiabatic process, S=constant
B)
for reversible isothermal heat transfer, Q=t(Sf-Si)
C)
both of the mentioned
D)
None of the above

Correct Answer :   both of the mentioned

A)
carbon and hydrogen
B)
sulphur and oxygen
C)
oxygen and hydrogen
D)
sulphur and hydrogen

Correct Answer :   carbon and hydrogen

A)
its temperature will increase
B)
its volume will increase
C)
Both (A) and (B)
D)
neither temperature not volume will increase

Correct Answer :   Both (A) and (B)

A)
Mond gas
B)
Producer gas
C)
Blast furnace gas
D)
Coal gas

Correct Answer :   Coal gas

A)
indirectly
B)
directly
C)
Can Not Say
D)
None of the above

Correct Answer :   directly

A)
its temperature increases but volume decreases
B)
its volume increases but temperature decreases
C)
both temperature and volume increases
D)
both temperature and volume decreases

Correct Answer :   both temperature and volume decreases

A)
16
B)
8
C)
4
D)
2

Correct Answer :   16

A)
be zero
B)
increase
C)
decrease
D)
None of the above

Correct Answer :   decrease


Explanation : The entropy of an isolated system always increases and remains constant only when the process is reversible.

A)
254.1 kJ/K
B)
354.1 kJ/K
C)
654.1 kJ/K
D)
554.1 kJ/K

Correct Answer :   654.1 kJ/K


Explanation : E = ⌠ W dt = 25 hp × 0.7457 (kW/hp) × 3600 s = 67 113 kJ = η Q
Q = E / η = 67 113 / 0.35 = 191 751 kJ
∆S = Q / T = 191 751 / 293.15 = 654.1 kJ/K.

A)
entropy of the system is reduced by Q/To
B)
system has lost entropy to the surroundings
C)
entropy increase of the surroundings is Q/To
D)
All of the above

Correct Answer :   All of the above


Explanation : We can say that there is entropy transfer from the system to the surroundings along with heat flow.

A)
constant pressure cycle
B)
constant volume cycle
C)
constant temperature cycle
D)
constant temperature and pressure cycle

Correct Answer :   constant volume cycle

A)
depends
B)
does not depend
C)
Can Not Say
D)
None of the above

Correct Answer :   depends

A)
carbonisation of bituminous coal
B)
passing steam over incandescent coke
C)
passing air and a large amount of steam over waste coal at about 650°C
D)
partial combustion of coal, coke, anthracite coal or charcoal in a mixed air steam blast

Correct Answer :   partial combustion of coal, coke, anthracite coal or charcoal in a mixed air steam blast

A)
v/T = constant, if p is kept constant
B)
T/p = constant, if v is kept constant
C)
p v = constant, if T is kept constant
D)
p/T = constant, if v is kept constant

Correct Answer :   p v = constant, if T is kept constant

A)
pressure ratio
B)
compression ratio
C)
temperature limits
D)
cut-off ratio and compression ratio

Correct Answer :   cut-off ratio and compression ratio

A)
conservation of heat
B)
conversion of heat into work
C)
conservation of work
D)
conversion of work into heat

Correct Answer :   conversion of heat into work

A)
elements
B)
atoms
C)
compounds
D)
molecules

Correct Answer :   elements

A)
First law of thermodynamics
B)
Second law of thermodynamics
C)
Zeroth law of thermodynamics
D)
None of the above

Correct Answer :   Zeroth law of thermodynamics

A)
12
B)
14
C)
16
D)
32

Correct Answer :   32

A)
Zeroth
B)
First
C)
Second
D)
None of the above

Correct Answer :   First

A)
mass of oxygen in 1 kg of flue gas to the mass of oxygen in 1 kg of fuel
B)
mass of carbon in 1 kg of flue gas to the mass of carbon in 1 kg of fuel
C)
mass of oxygen in 1 kg of fuel to the mass of oxygen in 1 kg of flue gas
D)
mass of carbon in 1 kg of fuel to the mass of carbon in 1 kg of flue gas

Correct Answer :   mass of carbon in 1 kg of flue gas to the mass of carbon in 1 kg of fuel

A)
220° to 345°C
B)
345° to 470°C
C)
470° to 550°C
D)
None of the above

Correct Answer :   220° to 345°C

A)
increasing the lowest temperature
B)
decreasing the highest temperature
C)
increasing the highest temperature
D)
keeping the lowest temperature constant

Correct Answer :   increasing the highest temperature

A)
higher
B)
lower
C)
Can Not Say
D)
None of the above

Correct Answer :   higher

A)
hard coke
B)
soft coke
C)
bituminous coal
D)
pulverised coal

Correct Answer :   soft coke

A)
True
B)
False
C)
Can Not Say
D)
None of the above

Correct Answer :   True

257 .
Which of the following is true?
A)
Q for reversible < Q for irreversible and work for reversible < work for irreversible
B)
Q for reversible > Q for irreversible and work for reversible < work for irreversible
C)
Q for reversible < Q for irreversible and work for reversible > work for irreversible
D)
Q for reversible > Q for irreversible and work for reversible > work for irreversible

Correct Answer :   Q for reversible > Q for irreversible and work for reversible > work for irreversible


Explaination : This is because, Q for reversible=(To)*(S2-S1) and Q for irreversible<(To)*(S1-S2).

A)
increases
B)
decreases
C)
remains constant
D)
None of the above

Correct Answer :   decreases

A)
dissipative effects or internal irreversibilities
B)
by heat interaction in which there is entropy transfer
C)
Both (A) and (B)
D)
None of the above

Correct Answer :   Both (A) and (B)

A)
thermodynamic law
B)
thermodynamic cycle
C)
thermodynamic process
D)
None of the above

Correct Answer :   thermodynamic process

A)
carbon
B)
sulphur and ash
C)
hydrogen and nitrogen
D)
All of the above

Correct Answer :   All of the above

A)
hard coke
B)
soft coke
C)
pulverised coal
D)
bituminous coal

Correct Answer :   hard coke

A)
0.086
B)
1.086
C)
3.086
D)
4.086

Correct Answer :   1.086

A)
reversible
B)
irreversible
C)
reversible or irreversible
D)
None of the above

Correct Answer :   irreversible

A)
8.314 J/kg mole-K
B)
83.14 J/kgmole-K
C)
831.4 J/kgmole-K
D)
8314 J/kgmole-K

Correct Answer :   8314 J/kgmole-K

A)
conservation of heat
B)
conservation of mass
C)
conservation of energy
D)
conservation of momentum

Correct Answer :   conservation of energy

267 .
A hot metal piece is cooled rapidly to 25°C, removing 1000 kJ from the metal. Calculate the change of entropy if saturated liquid R-22 at −20°C absorbs the energy so that it becomes saturated vapor.
A)
0.950 kJ/K
B)
3.950 kJ/K
C)
5.950 kJ/K
D)
7.950 kJ/K

Correct Answer :   3.950 kJ/K


Explaination : R-22 boiling at -20°C; m = 1Q2 /h(fg) = 1000/220.327 = 4.539 kg
∆S(R-22) = ms(fg) = 4.539(0.8703) = 3.950 kJ/K.

A)
heat or thermal energy
B)
heat from combustion of fossil fuel
C)
heat from nuclear fission or fusion
D)
All of the above

Correct Answer :   All of the above

A)
same
B)
different
C)
depends on the process
D)
None of the above

Correct Answer :   same

A)
increases
B)
decreases
C)
remains the same
D)
None of the above

Correct Answer :   increases


Explanation : We know that increase in internal energy causes more random motion.