What should be the load factor if, lift coefficient is designed as 2.1 and aircraft is operating at dynamic pressure q as 20 Pa. Given W/s =12.

3.25

3.5

4.5

5.5

Correct Answer : 3.5

Explanation : Given, W/S = 12, lift co-efficient CL = 2.1 and q=20Pa
Now load factor n is given by, n = q*CL / (W/S) = 20*2.1/12 = 3.5.

Recently Updated in Aircraft Design Questions

What should be the aspect ratio (AR) of the prop aircraft if it is designed to work with maximum loiter wing loading of 32, CD0 = 0.06, dynamic pressure of 20 unit and Oswald efficiency as 0.6.

9.65

8.54

7.65

7.54

Correct Answer : Option (B) : 7.54

Explaination :

An aircraft is to be designed to have max lift coefficient as 2.8 and at q=10Pa. If maximum load factor n=5 then, what will be the stall speed?

1.80m/s

1.80mph

2.80mph

2.80m/s

Correct Answer : Option (A) : 1.80m/s

Explanation :

An aircraft has lift to drag ratio during cruise as 2.5 and load factor as 1.2. Which value of thrust loading should be selected?

0.28

0.38

0.48

0.58

Correct Answer : Option (C) : 0.48

Explanation : Given, load factor n=1.2, lift to drag L/D = 2.5
Now, n at cruise is given by, n = (T/W)*(L/D).
Hence, T/w is given as,
T/W = n / (L/D) = 1.2/2.5 = 0.48.