What kind of motion is produced by the hinged blade which is lying in the plane of rotor disk?

Lag motion

Yaw motion

Roll motion

Flap motion

Correct Answer : Flap motion

Explanation : The hinged blade allows rigid body rotation about the hinge point which is acted upon by restoring moment due to centrifugal force acting on the rotating blade. For the hinge that lies in the plane of the rotor disk, there’s an out-of-plane deflection of the blades produced. This is known as flap motion. When the deflection of blade along vertical hinge arises, it is known as lag motion.

Recently Updated in Aerodynamics Questions

What is rotor polar?

Plot of power coefficient as a function of thrust coefficient

Plot of power coefficient as a function of lift coefficient

Plot of power coefficient as a function of drag coefficient

Plot of thrust coefficient as a function of power coefficient

Correct Answer : Option (A) : Plot of power coefficient as a function of thrust coefficient

Explanation : Plot of power coefficient Cp/σ as a function of thrust coefficient CT/σ is known as rotor polar. There is no loss of profile power for an ideal rotor and there is minimum induced loss. Due to profile power loss, the rotor polar for a real rotor is at an offset compared to the ideal polar, and power increases faster with thrust coefficient due to the larger induced power.

What is the inflow ratio for hovering?

1-1.5

0.6-1

0.01-0.05

0.05-0.07

Correct Answer : Option (D) : 0.05-0.07

Explanation : Inflow ratio is a nondimensional quantity that is used to compare the results from different rotor blades. The formula for inflow ratio is given by:

Where, V is the climb velocity which is zero for hovering
v is the induced velocity
Ω is the rate of rotation of the blade
R is the radius
The value of inflow ratio ranges between 0.05 and 0.07 for hovering.

Why is blade element theory preferred over momentum theory for designing a propeller?

Model thrust lag

Neglects span wise flow

Account for varying blade geometry

Assumes flow inside stream tube as constant

Correct Answer : Option (C) : Account for varying blade geometry

Explanation : There are several reasons why blade element theory is preferred over momentum theory. It can account for varying blade geometry, allows torque estimation, allows non-linearities for example lift curve to be modelled. The other points are some of the disadvantages.