We can minimize the weight of the structural member by _______

placing similar forces near to each other

placing opposite forces near to each other

placing opposite forces away from each other

placing only upward forces near to each other

Correct Answer : placing opposite forces near to each other

Explanation : To reduce the structural weight it is required that our design should have efficient load paths through which we can effectively connect opposing forces. For a typical aircraft, two common forces to be resolved are lift and force. Hence, by locating opposite forces near to each other we can improve structural considerations of our design.

Recently Updated in Aircraft Design Questions

What is the goal of preventive maintenance?

Increase equipment failure

To reduce breakdowns of critical equipment

To increase breakdowns of critical equipment

Not to provide maintenance at a given period of time

Correct Answer : Option (B) : To reduce breakdowns of critical equipment

Explanation : Maintenance can be divided into different types. Preventive is one of the type of maintenance. It is done with the goal of reducing critical equipment breakdown. It is done periodically and very well planned.

Which of the following can be considered as the worst feature of an aircraft in terms of maintainability?

Easily reachable parts

Requirements of removing number of major structural elements

Easily accessible parts

More accessibility is provided for components

Correct Answer : Option (B) : Requirements of removing number of major structural elements

Explanation : Easily accessible and reachable parts are primary requirement of maintainability considerations. Accessibility directly affects the effort and maintainability of an aircraft. If a design requires removal of major structural elements to access the component then, it is considered as the worst design based on maintainability.

What is corrective maintenance?

Scheduled maintenance

Pre break down maintenance

Maintenance of equipment after failure or break down

Maintenance before break down

Correct Answer : Option (C) : Maintenance of equipment after failure or break down

Explanation : Corrective maintenance is done after breakdown or failure. Maintenance done before breakdown is called preventive maintenance. Scheduled maintenance is similar to preventive.