The type of signal transmission in which no power is wasted on the carrier is known as ________

Aeronautical & Aerospace Engineering : Avionics - Quiz(MCQ)

Frequency modulation

Amplitude modulation

Unsuppressed carrier

Sideband suppressed carrier signal

Correct Answer : Sideband suppressed carrier signal

Explanation : In an SSB or single sideband signal, the carrier is suppressed leaving the upper and lower sidebands. The resulting signal is referred to as the sideband suppressed carrier signal and one of the major benefits of this type of signal is that no power is wasted on the carrier.

Recently Updated in Avionics Questions

Which of the following is true with respect to the bandwidth of a 2kHz audio signal and a 2kHz binary data?

Bandwidth is higher for binary data than audio signals

Bandwidth is higher for audio signals than binary data

Bandwidth remains the same for both

Bandwidth keeps increasing with time for the binary data

Correct Answer : Option (A) : Bandwidth is higher for binary data than audio signals

Explanation : Since binary data is transmitted in square waves or pulses, they are generally made up of numerous fundamental sine waves. This occupies a huge bandwidth as compared to audio signals which are analog in nature and usually comprise of a lesser number of sine waves.

What is the signal to noise ratio if the maximum allowable frequency deviation is 4kHz and the frequency deviation by noise is 156.42Hz?

0.0364

0.0391

20.45

25.75

Correct Answer : Option (D) : 25.75

Explaination : N/S = Frequency deviation by noise / maximum deviation = 156.42/4000 =0.0391
S/N = (N/S)^-1=25.57.

Calculate the phase difference by noise if the Signal to noise ratio is 7:2.

8.21°

13.65°

15.366°

17.5°

Correct Answer : Option (C) : 15.366°

Explanation : ?=sin^-1(N/S)=sin^-1(2/7)=sin^-1(0.265)=15.366°.