What is the average power of the transmitter if PEP = 500W?

Aeronautical & Aerospace Engineering : Avionics - Quiz(MCQ)

0W to 250W

0W to 500W

100W to 300W

125W to 166.66W

Correct Answer : 125W to 166.66W

Explanation : avionics

Recently Updated in Avionics Questions

Which of the following is true with respect to the bandwidth of a 2kHz audio signal and a 2kHz binary data?

Bandwidth is higher for binary data than audio signals

Bandwidth is higher for audio signals than binary data

Bandwidth remains the same for both

Bandwidth keeps increasing with time for the binary data

Correct Answer : Option (A) : Bandwidth is higher for binary data than audio signals

Explanation : Since binary data is transmitted in square waves or pulses, they are generally made up of numerous fundamental sine waves. This occupies a huge bandwidth as compared to audio signals which are analog in nature and usually comprise of a lesser number of sine waves.

What is the signal to noise ratio if the maximum allowable frequency deviation is 4kHz and the frequency deviation by noise is 156.42Hz?

0.0364

0.0391

20.45

25.75

Correct Answer : Option (D) : 25.75

Explaination : N/S = Frequency deviation by noise / maximum deviation = 156.42/4000 =0.0391
S/N = (N/S)^-1=25.57.

Calculate the phase difference by noise if the Signal to noise ratio is 7:2.

8.21°

13.65°

15.366°

17.5°

Correct Answer : Option (C) : 15.366°

Explanation : ?=sin^-1(N/S)=sin^-1(2/7)=sin^-1(0.265)=15.366°.