Which of the following is an example of CW transmission?

Aeronautical & Aerospace Engineering : Avionics - Quiz(MCQ)

TV wave transmission

Audio signal transmission

Sensor data transmission

Morse code transmission

Correct Answer : Morse code transmission

Explanation : Code transmission such as morse code are usually called continuous-wave (CW) transmissions. This kind of transmission is also referred to as ON/OFF keying (OOK). Despite the fact that only the carrier is being transmitted, sidebands are generated by such ON/OFF signals.

Recently Updated in Avionics Questions

Which of the following is true with respect to the bandwidth of a 2kHz audio signal and a 2kHz binary data?

Bandwidth is higher for binary data than audio signals

Bandwidth is higher for audio signals than binary data

Bandwidth remains the same for both

Bandwidth keeps increasing with time for the binary data

Correct Answer : Option (A) : Bandwidth is higher for binary data than audio signals

Explanation : Since binary data is transmitted in square waves or pulses, they are generally made up of numerous fundamental sine waves. This occupies a huge bandwidth as compared to audio signals which are analog in nature and usually comprise of a lesser number of sine waves.

What is the signal to noise ratio if the maximum allowable frequency deviation is 4kHz and the frequency deviation by noise is 156.42Hz?

0.0364

0.0391

20.45

25.75

Correct Answer : Option (D) : 25.75

Explaination : N/S = Frequency deviation by noise / maximum deviation = 156.42/4000 =0.0391
S/N = (N/S)^-1=25.57.

Calculate the phase difference by noise if the Signal to noise ratio is 7:2.

8.21°

13.65°

15.366°

17.5°

Correct Answer : Option (C) : 15.366°

Explanation : ?=sin^-1(N/S)=sin^-1(2/7)=sin^-1(0.265)=15.366°.