A block 100mm x 100mm base and 10mm height. What will the direct shear stress in the element when a tangential force of 10kN is applied to the upper edge to a displacement 1mm relative to lower face?

Civil Engineering : Strength of Materials - Quiz(MCQ)

1Pa

1MPa

10MPa

100Pa

Correct Answer : 1MPa

Explanation : Shear stress = 10kN / 100mmx100mm = 1 N/mm² = 1MPa.

Recently Updated in Strength of Materials Questions

The structures constructed along are distributaries are called as _______

Inlets

Outlets

Channels

Distributaries

Correct Answer : Option (B) : Outlets

Explanation : An outlet is a simple and small irrigation structure which is constructed along the distributaries. The amount of water that is withdrawn through the outlet is in proportion to the area that is irrigated below respective point.

The upstream slope recommended for sand and gravel with RCC core wall is ______

2.5:1

1:2

3:1

1.5:1

Correct Answer : Option (A) : 2.5:1

Explanation : According to Terazghi, the following upstream slopes should be recommended.

1. Homogeneous well graded – 2.5 : 1
2. Homogeneous coarse silt – 3 : 1
3. Sand and gravel with RCC core wall – 2.5 : 1.

Major distributaries discharge varies from _______

0.25 to 5 cumecs

2 to 4 cumecs

1.5 to 5 cumecs

1.2 to 5 cumecs

Correct Answer : Option (A) : 0.25 to 5 cumecs

Explanation : The major distributary takes off from a branch canal to distribute the water to various parts of the field. The supply of the water varies from 0.25 to 5 cumecs.